Jon Mac.Spoon Carving First Steps: Kuksa...

Saturday 28 August 2010

Kuksa...

This week I have been carving with the new MaChris No1.

I started with a couple of spoons and found the new knife to be just what I expected.

It's waste removal capabilities are second to none.

Armed with this knowledge I decided to make one of my trademark Kuksa...

Cutting and shaping the end grain is quite hard work and usually takes a long time.

I was impressed from the start as the knife easily dealt with this job...

I also tried a little chip carving around the handle to try out the super fine working tip, and I must say it was a dream to use.

I knife finished this Kuksa leaving it with a beautiful multi faceted finish, dipped in Italian coffee the Kuksa took on a splendid dark tan. I applied two coats of pure Tung oil and followed this up with a light coating of wax. As you can see the Kuksa now has a beautiful lustre...

The apple crop is coming along nicely too...

Coming soon...

The MaChris bushcraft knife...

ENJOY...J

2 comments:

Anonymous8 September 2010 at 07:27
Great work and a great blog! Maybe a stupid question but do you also use tung oil and wax for the inner side of the Kuksa?
ReplyDelete
Replies
Jon Mac8 September 2010 at 08:23
Hi hi 'A'...I use the oil, Tung or Walnut, all over to seal the wood. The wax is used as a protection on the surfaces not in contact with liquid....All the best...J
ReplyDelete
Replies

Add comment

Jon Mac.

Folk Artist.

Photographer.

Jon has worked with his hands all his life. He has learnt many traditional working skills, from construction to carving beautiful wooden spoons and drinking vessels. He has spent much time on Dartmoor teaching outdoor pursuits, such as Ten Tors team training and working with private companies providing team building/survival resources. He is a retired member of Mountain Rescue and spent seven years on the active call out list with his local team.

( D.R.G.Ashburton).

He has spent many years exploring the Devon countryside perusing his other interest in photography, industrial archaeology and local history. He recently used his local knowledge and field craft skills to great advantage when acting as field assistant to researchers investigating bat habitats and behaviour here on Dartmoor.

Jon runs tailor made courses both here in Devon and occasionally in Scotland, for anyone interested in spoon carving and woodcraft skills. Using traditional hand tools, Axe, hook knife and knife, he teaches the techniques for the fast and safe removal of waste wood, shaping and designing. He also teaches how to attain a super sharp cutting edge with the use of Japanese water stones.These skills are key to making anything you wish out of wood.

He is also a knife designer and has had his designs fabricated by top blade smiths.

Jon believes passionately that the skills of both using and maintaining knife and axe blades are ones which need to be shared, in order that we do not loose these important techniques. Jon particularly enjoys sharing these skills with those who have little or no experience of using edge tools.

Saturday 28 August 2010

Kuksa...

2 comments:

Carving a Dragon Kuksa.