Spoon carving.

Spoon carving with Jon Mac.
A blog following my journey in the world of bushcraft, spoon carving and kuksa carving. Home of the JonMac MiniMac carving knife.

FINISHING OILS - HEALTH AND SAFETY DATA - MSDS




  •  Pure Tung Oil

  • Premium, pure and natural oil for wood care
  • Ideal for use on food contact surfaces – kitchen worktops, chopping boards and salad bowls
  • Provides a long lasting matt finish
  • Water, heat and alcohol resistant
  • EN71 Approved – safe for toys
  • Suitable for interior and exterior use
  • Recommended for use on external Oak
  • Safe for toys
  • Ref: OL011206
Liberon Ltd, Mountfield Industrial Estate, New Romney, Kent, TN28 8XU
Tel: 01797 367555 Fax: 01797 367575

USAGE. Interior and exterior

COVERAGE.. 1 Litre 10-12 m2

APPLICATION. Brush or cloth

DRYING TIME. 24 hours between coats, 4 days final
TOOL CLEANING. White Spirit

  • Product use
Liberon Pure Tung Oil is highly resistant to water, alcohol and food acids. Providing a hard wearing finish it is ideal for surfaces such as kitchen worktops, tables and all high quality interior wood. Pure Tung Oil, with no added dryers, is a natural, non-toxic product which can be used on toys and objects in contact with food such as salad bowls etc. Being a penetrating oil it allows the wood to age gracefully and develop a natural patina. Recommended for use on exterior oak.
  • Preparation
Ensure the wood surface is bare: remove any wax finishes with Liberon Wax and Polish Remover and any varnish finishes with Liberon Fine Wood Stripper. Clean, dry and ensure the surface is dust free.
  • Application
Apply Tung Oil using a brush or lint-free cotton cloth. For ease of application dilute the first one or two coats with up to 50% white spirit. Allow the oil to penetrate for 20 to 30 minutes then wipe off the excess oil using a clean lint-free cloth. Allow to dry for 24 hours between coats.
Apply further coats of Tung Oil as above, reducing the amount of white spirit used with subsequent coats. Again allow 24 hours to dry.
Apply the last one or two coats of Tung Oil undiluted, as in previous applications. After the final coat has been applied and excess removed leave for 24 hours and wipe over again to aid drying and remove any oil that may have surfaced. We recommend a minimum of 4 coats; more coats will be required for porous or external surfaces. For best results gently rub with Liberon Ultra Fine Steel Wool (0000) between coats.
Leave for a few days before use to allow the Pure Tung Oil to dry fully. Furniture items may be finished with Liberon Black Bison Wax for an improved lustre.
Important: Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
  • Cleaning and maintenance
Pure Tung Oil must be maintained on a regular basis. Apply at least once or twice a year or more if required, depending upon exposure to the weather and usage. On exposed external timbers it is important to apply sufficient coats of oil to give the initial protection.
Precautions

  • Tung Oil is extracted from nuts and may cause an allergic reaction.

  • Store Liberon Tung Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.

  • Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.

  • If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.
  • Packaging
Pure Tung Oil is available in 250ml, 500ml, 1L and 5L containers.
Ref: OL011206
Liberon Ltd, Mountfield Industrial Estate, New Romney, Kent, TN28 8XU
Tel: 01797 367555 Fax: 01797 367575



SAFETY DATA SHEET
TUNG OIL
Version:1-1 First edition date: 08/07/2008 91/155/EC (2001/58/EC) - ISO 11014-1
1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product name: TUNG OIL
Uses or/and applications: wood care
Product code nr: 529
Supplier: Liberon Ltd
Mountfield Industrial Estate-NEW ROMNEY
KENT TN28 8XU
Phone: +44 1797 367555
Fax: +44 1797 36757533
E-mail: info.uk@v33.com
Emergency phone number (to be used UK - National Poisons Information Service Phone: 44 / 191 22 5131
by the practising doctor): B - Centre Antipoisons Tél: 070 / 245.245
2. HAZARDS IDENTIFICATION
Most important hazards: none
Specific hazards: none
3. COMPOSITION / INFORMATION ON INGREDIENTS
Formula: F0KJF00
Component(s) contributing to the None according to EC directives
hazard:
4. FIRST AID MEASURES
General advice: In all cases of doubt, or when symptoms persist, seek medical attention.
Never give anything by mouth to an unconscious person.
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
For symptom description, see item 11.
Inhalation: Move to fresh air.
Skin contact: Wash with water and soap as a precaution.
Eye contact: Wash with plenty of water.
Ingestion: Induce vomiting (ONLY IN CONSCIOUS PERSONS!).
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media: dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2).
Extinguishing media which must NOT Do not use a solid water stream as it may scatter and spread fire.
be used for safety reasons:
Specific method(s): Cool closed containers exposed to fire with water spray.
Do not allow run-off from fire fighting to enter drains or water courses.
Specific fire hazard(s): Concerning product toxicity, see item 11 and about product stability and reactivity
see item 10.
Special protective equipment for Use a self-contained breathing apparatus and also a protective suit
firefighters:
.
6. ACCIDENTAL RELEASE MEASURES
Personal precaution(s): Concerning personal protective equipment to use, see item 8.
Environmental precaution(s): Concerning disposal elimination after cleaning, see item 13.
Method(s) for cleaning up: Soak up with absorbent material (for example sand, sawdust, neutral absorbent
granule, silica gel).
Shovel into suitable and closed container for disposal.
Dispose as hazardous waste.
PAGE 1 / 3
SAFETY DATA SHEET
TUNG OIL
Version:1-1 First edition date: 08/07/2008 91/155/EC (2001/58/EC) - ISO 11014-1
7. HANDLING AND STORAGE
Handling
- Precaution(s): none
- Technical condition(s): none
- Safe handling advice(s): Opened containers must be carefully closed and kept upright to avoid leakage.
Storage
- Precaution(s): Store in a place accessible by authorised persons only.
Keep container tightly closed in a cool place.
- Technical condition(s): Not flammable and waterproof underground retention basin.
- Packaging / tank material: made of the same material as the supply container.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Control parameter(s):
- Exposure limit(s): No data available.
Personal protection equipment:
- Respiratory protection: No personal breathing protective equipment is normally required.
- Hand protection: Wear suitable gloves.
- Skin and body protection: protective clothing
- Eye protection: safety glasses
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
- Physical state / form: liquid
- Colour: light yellow
- Odour: characteristic
Important health,safety and
environmental information
- PH: Not applicable.
- Boiling point/range: Not determined.
- Flash point: Not determined.
- Explosion limits: Not determined.
- Relative density (water = 1): 0.932-0.937 g/cm³
- Viscosity: Not determined.
- Water solubility: immiscible
- Fat solubility: partly soluble
- Solvent solubility: soluble in most organic solvents
10. STABILITY AND REACTIVITY
Stability: Stable in use and storage conditions as recommended in item 7.
Hazardous decomposition products: none.
11. TOXICOLOGICAL INFORMATION
General information(s): There is no data available on the product itself.
Acute toxicity
- Inhalation: none
- Skin contact: No irritation
- Eyes contact: No irritation
PAGE 2 / 3
SAFETY DATA SHEET
TUNG OIL
Version:1-1 First edition date: 08/07/2008 91/155/EC (2001/58/EC) - ISO 11014-1
- Ingestion: none
12. ECOLOGICAL INFORMATION
General information(s): There is no data available on the product itself.
Persistence and degradability: Readily biodegradable.
Otheradverse effects
13. DISPOSAL CONSIDERATIONS
Waste / unused products: Collect all waste in suitable and labelled containers and dispose according to
local legislation.
Do not dispose of waste into sewer.
Contaminated packaging: This container is only to be used for this product.
Container remains hazardous when empty. Continue to observe all precautions.
Wastes, including emptied containers, are controlled wastes and should be disposed of in accordance with regulations made under the Control of Pollution Act and the Environmental Protection Act.
.
Further Information(s):
14. TRANSPORT INFORMATION
General information(s): not regulated
UN N°: Not applicable.
15. REGULATORY INFORMATION
Labelling: According to european directives on classification, packaging and labelling of
Dangerous substances
EC number: Not applicable.
Symbol(s): None according to EC directives.
R-phrase(s): None according to EC directives.
S-phrase(s): None according to EC directives.
16. OTHER INFORMATION
According legislation(s): This safety data sheet is in compliance with directives and adaptings: 91/155,
67/548, 88/379
Important remarks: Information in this safety data sheet is based on actual knowledge in our
possession and our experience.
It is recommended to pass the information of this safety data sheet, eventually in
an appropriated form, to the users.
Uses or/and applications: wood care
Restrictions: This information relates to the specific material designated and may not be valid
in combination with other product(s).
- First edition date: 08/07/2008
- Version: 1-1
Written by: V33
PAGE 3 / 3






  • Raw Linseed Oil

  • The original, traditional oil finish

  • For use on hard or close grained wood

  • Ideal for oiling cricket bats

  • Can be added to other oils to make unique blends

  • Traditional lubricant used in French Polishing

  • Add to putty to keep it soft
  •  EN71 Approved – safe for toys
  • Safe for toys
  • Ref: OL061206
Liberon Ltd, Mountfield Industrial Estate, New Romney, Kent, TN28 8XU
Tel: 01797 367555 Fax: 01797 367575
USAGE. Interior.

COVERAGE. 1 Litre. 8- 10 m2.

APPLICATION. Brush or cloth.

DRYING .TIME. Min 4 days

TOOL CLEANING. White Spirit.
  • Product use
The original oil polish with a tradition going back many centuries, Raw Linseed Oil is a hard wearing oil giving a mellow, patinated finish. It is ideal for oiling cricket bats and can be added to other oils to make unique blends.
  • Preparation
Ensure the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Raw Linseed Oil.
Application
For ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%), or alternatively heat the Raw Linseed Oil by placing it in a container and standing it in a bowl of hot water that can be frequently renewed. If heating the Raw Linseed Oil, DO NOT dilute with turpentine.
Rub well into the wood using a lint-free cotton cloth. After about 20-30 minutes wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at a few days interval. Apply a final coat of undiluted Raw Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A minimum of three coats is recommended.
A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.
Important: Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
  • Cleaning and maintenance
Wipe surface with a damp cloth and buff dry. Re-oil as and when required, depending upon usage.
Precautions

  • Store Liberon Raw Linseed Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.

  • Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.

  • If the excess is not removed and surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.
  • Packaging
Raw Linseed Oil is available in 250ml, 500ml, 1L and 5L containers.


SAFETY DATA SHEET
RAW LINSEED OIL
Version:1.2 Review date: 13/02/2009 91/155/EC (2001/58/EC) - ISO 11014-1
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product name: RAW LINSEED OIL
Uses or/and applications: wood care
Product code nr: 529
Supplier: Liberon Ltd
Mountfield Industrial Estate NEW ROMNEY
KENT TN28 8XU
Phone: +44 1797 367555
Fax: +44 1797 367575
E-mail: info.uk@v33.com
Emergency phone number: Doctor to contact UK National Poisons Information Service
2. HAZARDS IDENTIFICATION
Most important hazards: none
Specific hazards: none
3. COMPOSITION / INFORMATION ON INGREDIENTS
Formula: F0KJF00
Component(s) contributing to the None according to EC directives.
hazard:
4. FIRST AID MEASURES
General advice: In all cases of doubt, or when symptoms persist, seek medical attention.
Never give anything by mouth to an unconscious person.
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
For symptom description, see item 11.
Inhalation: Move to fresh air.
Skin contact: Wash with water and soap as a precaution.
Eye contact: Wash with plenty of water.
Ingestion: Induce vomiting (ONLY IN CONSCIOUS PERSONS!).
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media: dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2).
Extinguishing media which must NOT Do not use a solid water stream as it may scatter and spread fire.
be used for safety reasons:
Specific method(s): Cool closed containers exposed to fire with water spray.
Do not allow run-off from fire fighting to enter drains or water courses.
Specific fire hazard(s): Concerning product toxicity, see item 11 and about product stability and reactivity
see item 10.
Special protective equipment for Use a self-contained breathing apparatus and also a protective suit.
firefighters:
6. ACCIDENTAL RELEASE MEASURES
Personal precaution(s): Concerning personal protective equipment to use, see item 8.
Environmental precaution(s): Concerning disposal elimination after cleaning, see item 13.
Method(s) for cleaning up: Soak up with absorbent material (for example sand, sawdust, neutral absorbent
granule, silica gel).
Shovel into suitable and closed container for disposal.
Dispose as hazardous waste.
PAGE 1 / 3
SAFETY DATA SHEET
RAW LINSEED OIL
Version:1.2 Review date: 13/02/2009 91/155/EC (2001/58/EC) - ISO 11014-1
7. HANDLING AND STORAGE
Handling
- Precaution(s): none
- Technical condition(s): none
- Safe handling advice(s): Opened containers must be carefully closed and kept upright to avoid leakage.
Storage
- Precaution(s): Store in a place accessible by authorised persons only.
Keep container tightly closed in a cool place.
- Technical condition(s): Not flammable and waterproof underground retention basin.
- Packaging / tank material: made of the same material as the supply container.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Control parameter(s):
- Exposure limit(s): No data available.
Personal protection equipment:
- Respiratory protection: No personal breathing protective equipment is normally required.
- Hand protection: Wear suitable gloves.
- Skin and body protection: protective clothing
- Eye protection: safety glasses
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
- Physical state / form: liquid
- Colour: light yellow
- Odour: characteristic
Important health,safety and
environmental information
- PH: Not applicable.
- Boiling point/range: Not determined.
- Flash point: Not determined.
- Explosion limits: Not determined.
- Relative density (water = 1): 0.932-0.937 g/cm³
- Viscosity: Not determined.
- Water solubility: immiscible
- Fat solubility: partly soluble
- Solvent solubility: soluble in most organic solvents
10. STABILITY AND REACTIVITY
Stability: Stable in use and storage conditions as recommended in item 7.
Hazardous decomposition products: none.
11. TOXICOLOGICAL INFORMATION
General information(s): There is no data available on the product itself.
Acute toxicity
- Inhalation: none
- Skin contact: No irritation
- Eyes contact: No irritation
PAGE 2 / 3
SAFETY DATA SHEET
RAW LINSEED OIL
Version:1.2 Review date: 13/02/2009 91/155/EC (2001/58/EC) - ISO 11014-1
- Ingestion: none
12. ECOLOGICAL INFORMATION
General information(s): There is no data available on the product itself.
Persistence and degradability: Readily biodegradable.
Otheradverse effects
13. DISPOSAL CONSIDERATIONS
Waste / unused products: Collect all waste in suitable and labelled containers and dispose according to
local legislation.
Do not dispose of waste into sewer.
Contaminated packaging: This container is must only be used for this product.
Container remains hazardous when empty. Continue to observe all precautions.
Wastes, including emptied containers, are controlled wastes and should be disposed of in accordance with regulations made under the Control of Pollution Act and the Environmental Protection Act.
.
Further Information(s):
14. TRANSPORT INFORMATION
General information(s): not regulated
UN N°: Not applicable.
15. REGULATORY INFORMATION
Labelling: According to European directives on classification, packaging and labelling of
dangerous substances
EC number: Not applicable.
Symbol(s): None according to EC directives.
R-phrase(s): None according to EC directives.
S-phrase(s): None according to EC directives.
16. OTHER INFORMATION
According legislation(s): This safety data sheet is in compliance with directives and adaptings: 91/155,
67/548, 88/379
Important remarks: Information in this safety data sheet is based on actual knowledge in our
possession and our experience. It is recommended to pass the information of this safety data sheet, eventually in an appropriated form, to the users.
Uses or/and applications: wood care
Restrictions: This information relates to the specific material designated and may not be valid
in combination with other product(s).
- First edition date: 08/07/2008
- Review date 13/02/2009
- Version: 1-2
Written by: V33
PAGE 3 / 3








  •  NOT EN71 APPROVED !


  • Boiled Linseed Oil

  • Superior quality oil, similar to Raw Linseed, but has had hot air passed through to improve drying times

  • Ideal for use with all types of wood (expect exterior oak)

  • Provides a traditional hard wearing finish

  • Traditional sealer for terracotta and stone floors
  • Ref: OL071206
Liberon Ltd, Mountfield Industrial Estate, New Romney, Kent, TN28 8XU
Tel: 01797 367555 Fax: 01797 367575

USAGE. Interior.

COVERAGE. 1 Litre. 8- 10 m2.

APPLICATION. Brush or cloth.

DRYING TIME. 24 hours between coats, 24 hours final.

TOOL CLEANING. White Spirit.
  • Product use
Liberon Boiled Linseed Oil is used to give a mellow, patinated finish to new or stripped bare wood. A superior quality oil, similar to Raw Linseed, but having had hot air passed through to improve drying times, it is suitable for use on all types of wood, except exterior oak. It is also recommended as a sealer for terracotta tiles and other porous surfaces before waxing.
  • Preparation
Ensure that the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Boiled Linseed Oil.
  • Application
For ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%).
Rub well into the wood using a lint free cotton cloth. After about 20 minutes, wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at 24 hour intervals. Apply a final coat of Boiled Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.
  • Important: Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
  • Cleaning and maintenance
Wipe surface with a damp cloth and buff dry. Re-oil as and when required depending upon usage.
Precautions

  • Store Liberon Boiled Linseed Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.

  • Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.

  • If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.
Packaging
Boiled Linseed Oil is available in 250ml, 500ml, 1L and 5L containers.

SAFETY DATA SHEET
BOILED LINSEED OIL
Version:1.2 Review date: 13/02/2009 91/155/EC (2001/58/EC) - ISO 11014-1
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Product name: BOILED LINSEED OIL
Uses or/and applications: wood care
Product code nr: 529
Supplier: Liberon Ltd
Mountfield Industrial Estate NEW ROMNEY
KENT TN28 8XU
Phone: +44 1797 367555
Fax: +44 1797 367575
E-mail: info.uk@v33.com
Emergency phone number: Doctor to contact UK National Poisons Information Service
2. HAZARDS IDENTIFICATION
Most important hazards: none
Specific hazards: none
3. COMPOSITION / INFORMATION ON INGREDIENTS
Formula: F0KJF00
Component(s) contributing to the None according to EC directives.
hazard:
4. FIRST AID MEASURES
General advice: In all cases of doubt, or when symptoms persist, seek medical attention.
Never give anything by mouth to an unconscious person.
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
For symptom description, see item 11.
Inhalation: Move to fresh air.
Skin contact: Wash with water and soap as a precaution.
Eye contact: Wash with plenty of water.
Ingestion: Induce vomiting (ONLY IN CONSCIOUS PERSONS!).
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media: dry chemical powder, alcohol-resistant foam, carbon dioxide (CO2).
Extinguishing media which must NOT Do not use a solid water stream as it may scatter and spread fire.
be used for safety reasons:
Specific method(s): Cool closed containers exposed to fire with water spray.
Do not allow run-off from fire fighting to enter drains or water courses.
Specific fire hazard(s): Concerning product toxicity, see item 11 and about product stability and reactivity
see item 10.
Special protective equipment for firefighters:
Use a self-contained breathing apparatus and also a protective suit.
6. ACCIDENTAL RELEASE MEASURES
Personal precaution(s): Concerning personal protective equipment to use, see item 8.
Environmental precaution(s): Concerning disposal elimination after cleaning, see item 13.
Method(s) for cleaning up: Soak up with absorbent material (for example sand, sawdust, neutral absorbent
granule, silica gel).
Shovel into suitable and closed container for disposal.
Dispose as hazardous waste.
PAGE 1 / 3
SAFETY DATA SHEET
BOILED LINSEED OIL
Version:1.2 Review date:13/02/2009 91/155/EC (2001/58/EC) - ISO 11014-1
7. HANDLING AND STORAGE
Handling
- Precaution(s): none
- Technical condition(s): none
- Safe handling advice(s): Opened containers must be carefully closed and kept upright to avoid leakage.
Storage
- Precaution(s): Store in a place accessible by authorised persons only.
Keep container tightly closed in a cool place.
- Technical condition(s): Not flammable and waterproof underground retention basin.
- Packaging / tank material: made of the same material as the supply container.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Control parameter(s):
- Exposure limit(s):
No data available.
Personal protection equipment:
- Respiratory protection: No personal breathing protective equipment is normally required.
- Hand protection: Wear suitable gloves.
- Skin and body protection: protective clothing
- Eye protection: safety glasses
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
- Physical state / form: liquid
- Colour: light yellow
- Odour: characteristic
Important health,safety and
environmental information
- PH: Not applicable.
- Boiling point/range: Not determined.
- Flash point: Not determined.
- Explosion limits: Not determined.
- Relative density (water = 1): 0.932-0.937 g/cm³
- Viscosity: Not determined.
- Water solubility: immiscible
- Fat solubility: partly soluble
- Solvent solubility: soluble in most organic solvents
10. STABILITY AND REACTIVITY
Stability: Stable in use and storage conditions as recommended in item 7.
Hazardous decomposition products: none.
11. TOXICOLOGICAL INFORMATION
General information(s): There is no data available on the product itself.
Acute toxicity
- Inhalation: none
- Skin contact: No irritation
- Eyes contact: No irritation
PAGE 2 / 3
SAFETY DATA SHEET
BOILED LINSEED OIL
Version:1.2 Review date: 13/02/2009 91/155/EC (2001/58/EC) - ISO 11014-1
- Ingestion: none
12. ECOLOGICAL INFORMATION
General information(s): There is no data available on the product itself.
Persistence and degradability: Readily biodegradable.
Otheradverse effects
13. DISPOSAL CONSIDERATIONS
Waste / unused products: Collect all waste in suitable and labelled containers and dispose according to
local legislation.
Do not dispose of waste into sewer.
Contaminated packaging: This container is only to be used for this product.
Container remains hazardous when empty. Continue to observe all precautions.
Wastes, including emptied containers, are controlled wastes and should be disposed of in accordance with regulations made under the Control of Pollution Act and the Environmental Protection Act.
.
Further Information(s):
14. TRANSPORT INFORMATION
General information(s): not regulated
UN N°: Not applicable.
15. REGULATORY INFORMATION
Labelling: According to European directives on classification, packaging and labelling of
dangerous substances
EC number: Not applicable.
Symbol(s): None according to EC directives.
R-phrase(s): None according to EC directives.
S-phrase(s): None according to EC directives.
16. OTHER INFORMATION
According legislation(s): This safety data sheet is in compliance with directives and adaptings: 91/155,
67/548, 88/379
Important remarks: Information in this safety data sheet is based on actual knowledge in our
possession and our experience.
It is recommended to pass the information of this safety data sheet, eventually in
an appropriated form, to the users.
Uses or/and applications: wood care
Restrictions: This information relates to the specific material designated and may not be valid
in combination with other product(s).
- First edition date: 08/07/2008
-Review date 13/02/2009
- Version: 1-2
Written by: V33
PAGE 3 / 3

No comments:

Post a Comment